|Publication type:||Article in scientific journal|
|Type of review:||Peer review (publication)|
|Title:||Brominated PEAI as multi‐functional passivator for high‐efficiency perovskite solar cell|
|Published in:||Energy & Environmental Materials|
|Publisher / Ed. Institution:||Wiley|
|Subject (DDC):||621.3: Electrical, communications, control engineering|
|Abstract:||The interfaces of perovskite solar cells (PSCs) are well known to be rich in deep-level carrier traps, which serve as non-radiative recombination centers and limit the open-circuit voltage (Voc) and power conversion efficiency (PCE) of PSCs. Defect chemistry and surface passivators have been researched extensively and mainly focused on the neutralization of uncoordinated lead or anion defects. Herein, a novel brominated passivator 2-bromophenethylammonium iodide (2-Br-PEAI) is introduced for a multi-functional passivation effect at the perovskite interface. The brominated species readily form 2D perovskite on top of the 3D perovskite and multi-interact with the 3D perovskite surface. Apart from the halide vacancy filling and anion bonding ability, the Br atoms on the benzene ring can interact with the FA cations via strong hydrogen bonding N-H ⋯ Br and interact with the [PbI6]4− inorganic framework. The interface defects in the PSCs are well passivated, minimizing non-radiative recombination and enhancing device performance. As a result, a champion PCE of 24.22% was achieved with high Voc and fill factor. In addition, modified devices also showed enhanced operational stability (retention of >95% initial PCE after 400 h) and humidity resistance (>90% initial PCE maintained after 1500 h under ~50% RH).|
|Fulltext version:||Published version|
|License (according to publishing contract):||Licence according to publishing contract|
|Departement:||School of Engineering|
|Organisational Unit:||Institute of Computational Physics (ICP)|
|Appears in collections:||Publikationen School of Engineering|
Files in This Item:
There are no files associated with this item.
Show full item record
Li, M., Zhou, J., Tan, L., Liu, Y., Wang, S., Jiang, C., Li, H., Zhao, X., Gao, X., Tress, W., Ding, L., & Yi, C. (2022). Brominated PEAI as multi‐functional passivator for high‐efficiency perovskite solar cell. Energy & Environmental Materials. https://doi.org/10.1002/eem2.12360
Li, M. et al. (2022) ‘Brominated PEAI as multi‐functional passivator for high‐efficiency perovskite solar cell’, Energy & Environmental Materials [Preprint]. Available at: https://doi.org/10.1002/eem2.12360.
M. Li et al., “Brominated PEAI as multi‐functional passivator for high‐efficiency perovskite solar cell,” Energy & Environmental Materials, 2022, doi: 10.1002/eem2.12360.
Li, Minghao, et al. “Brominated PEAI as Multi‐Functional Passivator for High‐Efficiency Perovskite Solar Cell.” Energy & Environmental Materials, 2022, https://doi.org/10.1002/eem2.12360.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.