Publikationstyp: | Konferenz: Paper |
Art der Begutachtung: | Peer review (Publikation) |
Titel: | Dynamic frame packing in industrial applications using COTS components |
Autor/-in: | Schoch, Jonas Ganz, David Doran, Hans Weber, Karl |
DOI: | 10.1109/WFCS.2012.6242557 |
Tagungsband: | 2012 9th IEEE International Workshop on Factory Communication Systems |
Angaben zur Konferenz: | 9th IEEE International Workshop on Factory Communication Systems (WFCS), Lemgo, Germany, 21-24 May 2012 |
Erscheinungsdatum: | 2012 |
Verlag / Hrsg. Institution: | IEEE |
ISBN: | 978-1-4673-0692-8 978-1-4673-0693-5 978-1-4673-0691-1 |
Sprache: | Englisch |
Schlagwörter: | Real Time Ethernet; Industrial ethernet; PROFINET IRT |
Fachgebiet (DDC): | 621.3: Elektro-, Kommunikations-, Steuerungs- und Regelungstechnik |
Zusammenfassung: | Whilst Dynamic Frame Packing (DFP) has been defined in the PROFINET V2.3 standard and despite the fact that there are industrial applications that would derive benefit from the technique there are currently no commercially available controllers that support it. In fact there are currently no commercially available controllers that support PROFINET applications running at cycle-times lower than 250us. In this paper we describe an industry application that implements IRT phase-management, DFP and supports a cycle time of 62.5us whilst using a standard industry controller. |
URI: | https://digitalcollection.zhaw.ch/handle/11475/8877 |
Volltext Version: | Publizierte Version |
Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
Departement: | School of Engineering |
Organisationseinheit: | Institute of Embedded Systems (InES) |
Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Schoch, J., Ganz, D., Doran, H., & Weber, K. (2012). Dynamic frame packing in industrial applications using COTS components. 2012 9th IEEE International Workshop on Factory Communication Systems. https://doi.org/10.1109/WFCS.2012.6242557
Schoch, J. et al. (2012) ‘Dynamic frame packing in industrial applications using COTS components’, in 2012 9th IEEE International Workshop on Factory Communication Systems. IEEE. Available at: https://doi.org/10.1109/WFCS.2012.6242557.
J. Schoch, D. Ganz, H. Doran, and K. Weber, “Dynamic frame packing in industrial applications using COTS components,” in 2012 9th IEEE International Workshop on Factory Communication Systems, 2012. doi: 10.1109/WFCS.2012.6242557.
SCHOCH, Jonas, David GANZ, Hans DORAN und Karl WEBER, 2012. Dynamic frame packing in industrial applications using COTS components. In: 2012 9th IEEE International Workshop on Factory Communication Systems. Conference paper. IEEE. 2012. ISBN 978-1-4673-0692-8
Schoch, Jonas, David Ganz, Hans Doran, and Karl Weber. 2012. “Dynamic Frame Packing in Industrial Applications Using COTS Components.” Conference paper. In 2012 9th IEEE International Workshop on Factory Communication Systems. IEEE. https://doi.org/10.1109/WFCS.2012.6242557.
Schoch, Jonas, et al. “Dynamic Frame Packing in Industrial Applications Using COTS Components.” 2012 9th IEEE International Workshop on Factory Communication Systems, IEEE, 2012, https://doi.org/10.1109/WFCS.2012.6242557.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.