Publikationstyp: | Konferenz: Sonstiges |
Art der Begutachtung: | Keine Angabe |
Titel: | Additive manufactured porous titanium structures for customized implants |
Autor/-in: | Zumofen, Livia Kopanska, Katarzyna Kirchheim, Andreas de Haller, Emmanuel Graf-Hausner, Ursula |
Angaben zur Konferenz: | Rapid.Tech + FabCon 3.D 2017, Erfurt, Deutschland, 22. Juni 2017 |
Erscheinungsdatum: | 22-Jun-2017 |
Sprache: | Englisch |
Schlagwörter: | Additive manufacturing; Selective laser melting; Titanium; Porous titanium structure; Customized implant |
Fachgebiet (DDC): | 600: Technik 617: Chirurgie |
Zusammenfassung: | Meeting the huge variety of patient’s needs is only partially possible with standard medical implants. Optimally, medical implants should not only well integrate with tissues but also be compatible to the shape and size of the defect, its internal structure and mechanical properties. For bone implants titanium alloy Ti6Al4V is widely used. Ti6Al4V possesses a much higher stiffness compared to human bone, leading to stress shielding at the bone-implant interface that causes bone resorption and loosening of the implant. Specifically designed porous titanium structures with significantly reduced stiffness match better the properties of human bone. In particular custom-designed titanium implants in combination with functionally graded porosity show great potential in customized implants. Additive manufacturing technology Selective Laser Melting (SLM) is a technique that allows layer-wise generation of such complex metal structures with controlled architecture. The aim of this work was to evaluate structure parameters of SLM manufactured porous titanium structures for bone implants and their effect on mechanical properties and biological response. Furthermore, the basic suitability of porous titanium structures was investigated in a comparative study with commercially available material. |
URI: | https://digitalcollection.zhaw.ch/handle/11475/5249 |
Volltext Version: | Publizierte Version |
Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
Departement: | Life Sciences und Facility Management School of Engineering |
Organisationseinheit: | Institut für Chemie und Biotechnologie (ICBT) Institute of Product Development and Production Technologies (IPP) |
Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Zumofen, L., Kopanska, K., Kirchheim, A., de Haller, E., & Graf-Hausner, U. (2017, June 22). Additive manufactured porous titanium structures for customized implants. Rapid.Tech + FabCon 3.D 2017, Erfurt, Deutschland, 22. Juni 2017.
Zumofen, L. et al. (2017) ‘Additive manufactured porous titanium structures for customized implants’, in Rapid.Tech + FabCon 3.D 2017, Erfurt, Deutschland, 22. Juni 2017.
L. Zumofen, K. Kopanska, A. Kirchheim, E. de Haller, and U. Graf-Hausner, “Additive manufactured porous titanium structures for customized implants,” in Rapid.Tech + FabCon 3.D 2017, Erfurt, Deutschland, 22. Juni 2017, Jun. 2017.
ZUMOFEN, Livia, Katarzyna KOPANSKA, Andreas KIRCHHEIM, Emmanuel DE HALLER und Ursula GRAF-HAUSNER, 2017. Additive manufactured porous titanium structures for customized implants. In: Rapid.Tech + FabCon 3.D 2017, Erfurt, Deutschland, 22. Juni 2017. Conference presentation. 22 Juni 2017
Zumofen, Livia, Katarzyna Kopanska, Andreas Kirchheim, Emmanuel de Haller, and Ursula Graf-Hausner. 2017. “Additive Manufactured Porous Titanium Structures for Customized Implants.” Conference presentation. In Rapid.Tech + FabCon 3.D 2017, Erfurt, Deutschland, 22. Juni 2017.
Zumofen, Livia, et al. “Additive Manufactured Porous Titanium Structures for Customized Implants.” Rapid.Tech + FabCon 3.D 2017, Erfurt, Deutschland, 22. Juni 2017, 2017.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.