| Publikationstyp: | Konferenz: Paper |
| Art der Begutachtung: | Peer review (Publikation) |
| Titel: | Novel 4-axis 3D printing process to print overhangs without support material |
| Autor/-in: | Wüthrich, Michael Elspass, Wilfried Johannes Bos, Philip Holdener, Simon |
| et. al: | No |
| DOI: | 10.1007/978-3-030-54334-1_10 |
| Tagungsband: | Industrializing Additive Manufacturing : Proceedings of AMPA 2020 |
| Herausgeber/-in des übergeordneten Werkes: | Meboldt, Mirko Klahn, Christoph |
| Seite(n): | 130 |
| Seiten bis: | 145 |
| Angaben zur Konferenz: | 2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020 |
| Erscheinungsdatum: | 1-Sep-2020 |
| Verlag / Hrsg. Institution: | Springer |
| Verlag / Hrsg. Institution: | Cham |
| ISBN: | 978-3-030-54333-4 978-3-030-54334-1 |
| Sprache: | Englisch |
| Schlagwörter: | FDM printing; 3D printing process; Overhang; Supportless printing |
| Fachgebiet (DDC): | 620: Ingenieurwesen 670: Industrielle und handwerkliche Fertigung |
| Zusammenfassung: | This paper describes a novel 4-axis FDM printing process with a newly designed printhead, for the printing of overhangs without support structures. With conventional FDM printing, overhangs of more than 45°–60° must be supported. For this novel printing process, the printhead is rotated 45° around a horizontal axis and equipped with a vertical, rotational axis. The printhead no longer follows layers parallel to the build platform, but moves on the surface of a 45° cone. The printing cone increases in diameter from layer to layer. With this cone-shaped layers, the printable angles increases by 45°, which leads to printable overhangs of up to approximately 100°. New slicing strategies for this printing process have been developed to slice the parts for the novel printing process. The feasibility of the concept has been prototypically demonstrated. The novel design achieves the advantages of higher speed and quality with lower cost at the same time. |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/21304 |
| Volltext Version: | Publizierte Version |
| Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
| Departement: | School of Engineering |
| Organisationseinheit: | Institut für Mechatronische Systeme (IMS) |
| Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Wüthrich, M., Elspass, W. J., Bos, P., & Holdener, S. (2020). Novel 4-axis 3D printing process to print overhangs without support material [Conference paper]. In M. Meboldt & C. Klahn (Eds.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020 (pp. 130–145). Springer. https://doi.org/10.1007/978-3-030-54334-1_10
Wüthrich, M. et al. (2020) ‘Novel 4-axis 3D printing process to print overhangs without support material’, in M. Meboldt and C. Klahn (eds) Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Cham: Springer, pp. 130–145. Available at: https://doi.org/10.1007/978-3-030-54334-1_10.
M. Wüthrich, W. J. Elspass, P. Bos, and S. Holdener, “Novel 4-axis 3D printing process to print overhangs without support material,” in Industrializing Additive Manufacturing : Proceedings of AMPA 2020, Sep. 2020, pp. 130–145. doi: 10.1007/978-3-030-54334-1_10.
WÜTHRICH, Michael, Wilfried Johannes ELSPASS, Philip BOS und Simon HOLDENER, 2020. Novel 4-axis 3D printing process to print overhangs without support material. In: Mirko MEBOLDT und Christoph KLAHN (Hrsg.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Conference paper. Cham: Springer. 1 September 2020. S. 130–145. ISBN 978-3-030-54333-4
Wüthrich, Michael, Wilfried Johannes Elspass, Philip Bos, and Simon Holdener. 2020. “Novel 4-Axis 3D Printing Process to Print Overhangs without Support Material.” Conference paper. In Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, 130–45. Cham: Springer. https://doi.org/10.1007/978-3-030-54334-1_10.
Wüthrich, Michael, et al. “Novel 4-Axis 3D Printing Process to Print Overhangs without Support Material.” Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, Springer, 2020, pp. 130–45, https://doi.org/10.1007/978-3-030-54334-1_10.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.