Publikationstyp: | Beitrag in wissenschaftlicher Zeitschrift |
Art der Begutachtung: | Peer review (Publikation) |
Titel: | Characterising PEM fuel cell performance using current distribution measurement in comparison with a CFD model |
Autor/-in: | Hakenjos, Alexander Tüber, Klaus Schumacher, Jürgen Hebling, Christopher |
DOI: | 10.1002/fuce.200400026 |
Erschienen in: | Fuel Cells |
Band(Heft): | 4 |
Heft: | 3 |
Seite(n): | 185 |
Seiten bis: | 189 |
Erscheinungsdatum: | 29-Jul-2004 |
Verlag / Hrsg. Institution: | Wiley |
ISSN: | 1615-6846 1615-6854 |
Sprache: | Englisch |
Schlagwörter: | Computational fluid dynamics; PEMfc; Fuel cells; Modelling |
Fachgebiet (DDC): | 621.3: Elektro-, Kommunikations-, Steuerungs- und Regelungstechnik |
Zusammenfassung: | The characterisation of a proton membrane (PEM) fuel cell with a straight channel flow field design is performed. Spatially resolved current distribution measurements, at different air flow rates, are compared to numerical simulation results. The numerical model is validated by agreement of the measured and simulated current distribution. The test cell is segmented. It is operated at steady state conditions and the gas flow rates and cell temperature are controlled. The numerical simulation is realised with a PEM fuel cell model based on FLUENT computational fluid dynamics (CFD) software. It accounts for mass transport in the gaseous phase, heat transfer, electrical potential field and the electrochemical reaction. It provides three-dimensional distributions, e.g., current densities, reactant concentrations and temperature. |
URI: | https://digitalcollection.zhaw.ch/handle/11475/11601 |
Volltext Version: | Publizierte Version |
Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
Departement: | School of Engineering |
Organisationseinheit: | Institute of Computational Physics (ICP) |
Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Hakenjos, A., Tüber, K., Schumacher, J., & Hebling, C. (2004). Characterising PEM fuel cell performance using current distribution measurement in comparison with a CFD model. Fuel Cells, 4(3), 185–189. https://doi.org/10.1002/fuce.200400026
Hakenjos, A. et al. (2004) ‘Characterising PEM fuel cell performance using current distribution measurement in comparison with a CFD model’, Fuel Cells, 4(3), pp. 185–189. Available at: https://doi.org/10.1002/fuce.200400026.
A. Hakenjos, K. Tüber, J. Schumacher, and C. Hebling, “Characterising PEM fuel cell performance using current distribution measurement in comparison with a CFD model,” Fuel Cells, vol. 4, no. 3, pp. 185–189, Jul. 2004, doi: 10.1002/fuce.200400026.
HAKENJOS, Alexander, Klaus TÜBER, Jürgen SCHUMACHER und Christopher HEBLING, 2004. Characterising PEM fuel cell performance using current distribution measurement in comparison with a CFD model. Fuel Cells. 29 Juli 2004. Bd. 4, Nr. 3, S. 185–189. DOI 10.1002/fuce.200400026
Hakenjos, Alexander, Klaus Tüber, Jürgen Schumacher, and Christopher Hebling. 2004. “Characterising PEM Fuel Cell Performance Using Current Distribution Measurement in Comparison with a CFD Model.” Fuel Cells 4 (3): 185–89. https://doi.org/10.1002/fuce.200400026.
Hakenjos, Alexander, et al. “Characterising PEM Fuel Cell Performance Using Current Distribution Measurement in Comparison with a CFD Model.” Fuel Cells, vol. 4, no. 3, July 2004, pp. 185–89, https://doi.org/10.1002/fuce.200400026.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.