| Publikationstyp: | Beitrag in wissenschaftlicher Zeitschrift |
| Art der Begutachtung: | Peer review (Publikation) |
| Titel: | Simulation and validation of thermo-mechanical stresses in planar SOFCs |
| Autor/-in: | Kuebler, Jakob Vogt, Uli F. Haberstock, D. Sfeir, J. Mai, Andreas Hocker, Thomas Roos, Markus Harnisch, Urs |
| DOI: | 10.1002/fuce.201000040 |
| Erschienen in: | Fuel Cells |
| Band(Heft): | 10 |
| Heft: | 6 |
| Seite(n): | 1066 |
| Seiten bis: | 1073 |
| Erscheinungsdatum: | 1-Okt-2010 |
| Verlag / Hrsg. Institution: | Wiley |
| ISSN: | 1615-6846 1615-6854 |
| Sprache: | Englisch |
| Schlagwörter: | Fuel cell; Thermo-mechanical stress; Failure mechanism; SOFC |
| Fachgebiet (DDC): | 530: Physik 621.3: Elektro-, Kommunikations-, Steuerungs- und Regelungstechnik |
| Zusammenfassung: | To study possible failure modes of the Hexis Galileo solid oxide fuel cell stack, various stack components such as nickel/yttria stabilised zirconia anodes, lanthanum strontium manganese cathodes, 3 mol%-yttria stabilised zirconia electrolytes and chromium alloy metallic interconnectors have been characterised with respect to their thermo-mechanical properties. Specifically, coefficients of thermal expansion, Young's moduli, bending strengths, Poisson's ratios and fracture toughnesses have been measured. Furthermore, the temperature-dependent warpage of complete cells has been investigated by video analysis. All experimental data were taken as input parameters for a set of finite element models to analyse various thermo-mechanical phenomena on different length scales. The simulations offer an explanation for the often observed ´saddle-like´ deformations of cells at room temperature. They also show that cracks that first develop within the anode induce local tensile stresses within the electrolyte and hence represent a weakening mechanism for the cells. It is shown that the induced electrolyte stresses depend on the anode crack density. The electrolyte stresses decrease as the distances between the anode cracks become smaller. |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/1638 |
| Volltext Version: | Publizierte Version |
| Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
| Departement: | School of Engineering |
| Organisationseinheit: | Institute of Computational Physics (ICP) |
| Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Kuebler, J., Vogt, U. F., Haberstock, D., Sfeir, J., Mai, A., Hocker, T., Roos, M., & Harnisch, U. (2010). Simulation and validation of thermo-mechanical stresses in planar SOFCs. Fuel Cells, 10(6), 1066–1073. https://doi.org/10.1002/fuce.201000040
Kuebler, J. et al. (2010) ‘Simulation and validation of thermo-mechanical stresses in planar SOFCs’, Fuel Cells, 10(6), pp. 1066–1073. Available at: https://doi.org/10.1002/fuce.201000040.
J. Kuebler et al., “Simulation and validation of thermo-mechanical stresses in planar SOFCs,” Fuel Cells, vol. 10, no. 6, pp. 1066–1073, Oct. 2010, doi: 10.1002/fuce.201000040.
KUEBLER, Jakob, Uli F. VOGT, D. HABERSTOCK, J. SFEIR, Andreas MAI, Thomas HOCKER, Markus ROOS und Urs HARNISCH, 2010. Simulation and validation of thermo-mechanical stresses in planar SOFCs. Fuel Cells. 1 Oktober 2010. Bd. 10, Nr. 6, S. 1066–1073. DOI 10.1002/fuce.201000040
Kuebler, Jakob, Uli F. Vogt, D. Haberstock, J. Sfeir, Andreas Mai, Thomas Hocker, Markus Roos, and Urs Harnisch. 2010. “Simulation and Validation of Thermo-Mechanical Stresses in Planar SOFCs.” Fuel Cells 10 (6): 1066–73. https://doi.org/10.1002/fuce.201000040.
Kuebler, Jakob, et al. “Simulation and Validation of Thermo-Mechanical Stresses in Planar SOFCs.” Fuel Cells, vol. 10, no. 6, Oct. 2010, pp. 1066–73, https://doi.org/10.1002/fuce.201000040.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.