Publikationstyp: | Konferenz: Sonstiges |
Art der Begutachtung: | Peer review (Abstract) |
Titel: | Water soluble feedstocks for additive manufacturing of complex shapes and flexible interconnected ceramic parts |
Autor/-in: | Penner, Dirk Wick-Joliat, René |
et. al: | No |
Angaben zur Konferenz: | 48th International Conference and Expo on Advanced Ceramics and Composites (ICACC2024), Daytona Beach, USA, 28 January - 2 February 2024 |
Erscheinungsdatum: | 31-Jan-2024 |
Sprache: | Englisch |
Schlagwörter: | Ceramics; Additive manufacturing; MEX material extrusion; Injection molding; Soluble mold |
Fachgebiet (DDC): | 670: Industrielle und handwerkliche Fertigung |
Zusammenfassung: | Material extrusion MEX of complex thermoplastic structures often depends on the reliable printing of a water-soluble support structure. The material of choice is typically polyvinyl alcohol (PVA), which is difficult to use in ceramic MEX printing due to a limited printing compatibility with most ceramic feedstocks (poor layer adhesion). A new thermoplastic feedstock concept was developed as temporary water-soluble support material on the basis of NaCl mixed with a commercial injection molding binder system. Additive manufacturing enables the introduction of new molding concepts not only through the direct printing of ceramic green bodies with or without support material, but also generally through the production of water-soluble mold materials. The particular advantage of additive manufacturing's virtually unlimited geometry complexity then additionally allows the production of undercut models, threads, channels, and other otherwise complicated mold elements. The use of soluble molds instead of direct 3D printing of ceramic green bodies thus offers the possibility to partially circumvent existing limitations of currently available technologies and materials. |
URI: | https://digitalcollection.zhaw.ch/handle/11475/29826 |
Volltext Version: | Publizierte Version |
Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
Departement: | School of Engineering |
Organisationseinheit: | Institute of Materials and Process Engineering (IMPE) |
Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Penner, D., & Wick-Joliat, R. (2024, January 31). Water soluble feedstocks for additive manufacturing of complex shapes and flexible interconnected ceramic parts. 48th International Conference and Expo on Advanced Ceramics and Composites (ICACC2024), Daytona Beach, USA, 28 January - 2 February 2024.
Penner, D. and Wick-Joliat, R. (2024) ‘Water soluble feedstocks for additive manufacturing of complex shapes and flexible interconnected ceramic parts’, in 48th International Conference and Expo on Advanced Ceramics and Composites (ICACC2024), Daytona Beach, USA, 28 January - 2 February 2024.
D. Penner and R. Wick-Joliat, “Water soluble feedstocks for additive manufacturing of complex shapes and flexible interconnected ceramic parts,” in 48th International Conference and Expo on Advanced Ceramics and Composites (ICACC2024), Daytona Beach, USA, 28 January - 2 February 2024, Jan. 2024.
PENNER, Dirk und René WICK-JOLIAT, 2024. Water soluble feedstocks for additive manufacturing of complex shapes and flexible interconnected ceramic parts. In: 48th International Conference and Expo on Advanced Ceramics and Composites (ICACC2024), Daytona Beach, USA, 28 January - 2 February 2024. Conference presentation. 31 Januar 2024
Penner, Dirk, and René Wick-Joliat. 2024. “Water Soluble Feedstocks for Additive Manufacturing of Complex Shapes and Flexible Interconnected Ceramic Parts.” Conference presentation. In 48th International Conference and Expo on Advanced Ceramics and Composites (ICACC2024), Daytona Beach, USA, 28 January - 2 February 2024.
Penner, Dirk, and René Wick-Joliat. “Water Soluble Feedstocks for Additive Manufacturing of Complex Shapes and Flexible Interconnected Ceramic Parts.” 48th International Conference and Expo on Advanced Ceramics and Composites (ICACC2024), Daytona Beach, USA, 28 January - 2 February 2024, 2024.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.