Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen:
https://doi.org/10.21256/zhaw-28287| Publikationstyp: | Beitrag in wissenschaftlicher Zeitschrift |
| Art der Begutachtung: | Peer review (Publikation) |
| Titel: | XCT analysis of drill cores of Opalinus clay and determination of sample size for effective properties evaluation |
| Autor/-in: | Keller, Lukas M. |
| et. al: | No |
| DOI: | 10.3389/feart.2023.1177408 10.21256/zhaw-28287 |
| Erschienen in: | Frontiers in Earth Science |
| Band(Heft): | 11 |
| Heft: | 1177408 |
| Erscheinungsdatum: | 2023 |
| Verlag / Hrsg. Institution: | Frontiers Research Foundation |
| ISSN: | 2296-6463 |
| Sprache: | Englisch |
| Schlagwörter: | Opalinus clay; Nuclear waste; Deep drilling; Effective property; Compositional variation |
| Fachgebiet (DDC): | 551: Geologie und Hydrologie 620: Ingenieurwesen |
| Zusammenfassung: | In Switzerland, the Opalinus Clay unit was chosen as host rock for a repository for nuclear waste and has recently been investigated in a deep drilling campaign at possible repository construction sites. X-ray images of drill cores were compiled into virtual rock columns and were statistically analyzed with respect to layered compositional variations. This provides insight into scale-dependent homogenization and improves sampling strategy. To predict the repository behavior, using continuum-based models of Opalinus Clay, requires the knowledge of effective properties related to a minimum volume at which Opalinus Clay behaves homogeneously. It turned out that with respect to rock composition, such a volume does not exist in the sense that a single sample of manageable size provides a reliable mean composition. This is because the variation of the cm to dm thick layers, which differ in composition, does not sufficiently homogenize even at the 10-m scale. Thus, effective properties must be obtained by averaging several handleable samples. Regarding the composition of Opalinus Clay at a particular location, about 30 samples, distributed over the whole thickness, with a length of about 30 cm should be measured so that the relative error of the mean value is not higher than 5%–10%. For the statistical analyses computed tomography (CT) values of X-ray data were calibrated with respect to rock composition based on laboratory measurements. The CT values are largely controlled by the respective volume fraction of calcite, quartz, and porous clay matrix. These three components form >80 vol% of the sedimentary rocks studied (also above and below Opalinus Clay). The relationship between CT value and component contents depends on the rock type. The use of data from different rock types to calibrate CT values with respect to composition can lead to erroneous results. |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/28287 |
| Volltext Version: | Publizierte Version |
| Lizenz (gemäss Verlagsvertrag): | CC BY 4.0: Namensnennung 4.0 International |
| Departement: | School of Engineering |
| Organisationseinheit: | Institute of Computational Physics (ICP) |
| Publiziert im Rahmen des ZHAW-Projekts: | CAPACITIVE – XCT Daten von Opalinus Clay Clay und mikrostrukturelle Untersuchungen |
| Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
| Datei | Beschreibung | Größe | Format | |
|---|---|---|---|---|
| 2023_Keller_XCT-analysis-of-drill-cores-Opalinus-clay.pdf | 4.54 MB | Adobe PDF |  Öffnen/Anzeigen |
Zur Langanzeige
Keller, L. M. (2023). XCT analysis of drill cores of Opalinus clay and determination of sample size for effective properties evaluation. Frontiers in Earth Science, 11(1177408). https://doi.org/10.3389/feart.2023.1177408
Keller, L.M. (2023) ‘XCT analysis of drill cores of Opalinus clay and determination of sample size for effective properties evaluation’, Frontiers in Earth Science, 11(1177408). Available at: https://doi.org/10.3389/feart.2023.1177408.
L. M. Keller, “XCT analysis of drill cores of Opalinus clay and determination of sample size for effective properties evaluation,” Frontiers in Earth Science, vol. 11, no. 1177408, 2023, doi: 10.3389/feart.2023.1177408.
KELLER, Lukas M., 2023. XCT analysis of drill cores of Opalinus clay and determination of sample size for effective properties evaluation. Frontiers in Earth Science. 2023. Bd. 11, Nr. 1177408. DOI 10.3389/feart.2023.1177408
Keller, Lukas M. 2023. “XCT Analysis of Drill Cores of Opalinus Clay and Determination of Sample Size for Effective Properties Evaluation.” Frontiers in Earth Science 11 (1177408). https://doi.org/10.3389/feart.2023.1177408.
Keller, Lukas M. “XCT Analysis of Drill Cores of Opalinus Clay and Determination of Sample Size for Effective Properties Evaluation.” Frontiers in Earth Science, vol. 11, no. 1177408, 2023, https://doi.org/10.3389/feart.2023.1177408.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.