Publikationstyp: | Beitrag in wissenschaftlicher Zeitschrift |
Art der Begutachtung: | Peer review (Publikation) |
Titel: | Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells |
Autor/-in: | Wang, Siyang Tan, Liguo Zhou, Junjie Li, Minghao Zhao, Xing Li, Hang Tress, Wolfgang Ding, Liming Graetzel, Michael Yi, Chenyi |
et. al: | No |
DOI: | 10.1016/j.joule.2022.05.002 |
Erschienen in: | Joule |
Band(Heft): | 6 |
Heft: | 6 |
Seite(n): | 1344 |
Seiten bis: | 1356 |
Erscheinungsdatum: | 2022 |
Verlag / Hrsg. Institution: | Cell Press |
ISSN: | 2542-4351 2542-4785 |
Sprache: | Englisch |
Fachgebiet (DDC): | 621.3: Elektro-, Kommunikations-, Steuerungs- und Regelungstechnik |
Zusammenfassung: | Methylammonium (MA)-free perovskites such as CsxFA1-xPbX3 (CsFA) show excellent thermal stability, favoring their use in perov-skite solar cells (PSCs). However, the power conversion efficiency (PCE) of CsFA lags behind that of MA-containing formulations due to the difficulty in controlling the film morphology. Herein, we report innovative morphology engineering using solution deposition of a mixture of CsBr, PbI2, and PbCl2 followed by vacuum evaporation of formamidinium iodide (FAI) to fabricate CsFA films. The introduction of a chloride precursor leads to larger grain sizes, forming a high-quality CsFA film under annealing. This enables the realization of robust CsFA-based PSCs with the highest reported PCE up to 24.1% (certified 23.9%) for 0.1 cm2 and 22.8% for 1 cm2 devices. Moreover, the unencapsulated evaporation device shows excellent stability with negligible efficiency decline after 20,000 h of storage in dry air or 1,000 h of exposure to 50% humidity, which is much better than the device prepared using the solution procedure. |
URI: | https://digitalcollection.zhaw.ch/handle/11475/26610 |
Volltext Version: | Publizierte Version |
Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
Departement: | School of Engineering |
Organisationseinheit: | Institute of Computational Physics (ICP) |
Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Wang, S., Tan, L., Zhou, J., Li, M., Zhao, X., Li, H., Tress, W., Ding, L., Graetzel, M., & Yi, C. (2022). Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells. Joule, 6(6), 1344–1356. https://doi.org/10.1016/j.joule.2022.05.002
Wang, S. et al. (2022) ‘Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells’, Joule, 6(6), pp. 1344–1356. Available at: https://doi.org/10.1016/j.joule.2022.05.002.
S. Wang et al., “Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells,” Joule, vol. 6, no. 6, pp. 1344–1356, 2022, doi: 10.1016/j.joule.2022.05.002.
WANG, Siyang, Liguo TAN, Junjie ZHOU, Minghao LI, Xing ZHAO, Hang LI, Wolfgang TRESS, Liming DING, Michael GRAETZEL und Chenyi YI, 2022. Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells. Joule. 2022. Bd. 6, Nr. 6, S. 1344–1356. DOI 10.1016/j.joule.2022.05.002
Wang, Siyang, Liguo Tan, Junjie Zhou, Minghao Li, Xing Zhao, Hang Li, Wolfgang Tress, Liming Ding, Michael Graetzel, and Chenyi Yi. 2022. “Over 24% Efficient MA-Free CsxFA1−xPbX3 Perovskite Solar Cells.” Joule 6 (6): 1344–56. https://doi.org/10.1016/j.joule.2022.05.002.
Wang, Siyang, et al. “Over 24% Efficient MA-Free CsxFA1−xPbX3 Perovskite Solar Cells.” Joule, vol. 6, no. 6, 2022, pp. 1344–56, https://doi.org/10.1016/j.joule.2022.05.002.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.