Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen:
https://doi.org/10.21256/zhaw-20460| Publikationstyp: | Konferenz: Paper |
| Art der Begutachtung: | Peer review (Publikation) |
| Titel: | Feasibility investigation of gears manufactured by fused filament fabrication |
| Autor/-in: | Dennig, Hans-Jörg Zumofen, Livia Kirchheim, Andreas |
| et. al: | No |
| DOI: | 10.1007/978-3-030-54334-1_22 10.21256/zhaw-20460 |
| Tagungsband: | Industrializing Additive Manufacturing : Proceedings of AMPA 2020 |
| Herausgeber/-in des übergeordneten Werkes: | Meboldt, Mirko Klahn, Christoph |
| Seite(n): | 304 |
| Seiten bis: | 320 |
| Angaben zur Konferenz: | 2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020 |
| Erscheinungsdatum: | 1-Sep-2020 |
| Verlag / Hrsg. Institution: | Springer |
| Verlag / Hrsg. Institution: | Cham |
| ISBN: | 978-3-030-54333-4 978-3-030-54334-1 |
| Sprache: | Englisch |
| Schlagwörter: | Gear; Fused filament fabrication; Testing; Additive manufacturing; VDI 2736 |
| Fachgebiet (DDC): | 670: Industrielle und handwerkliche Fertigung |
| Zusammenfassung: | This paper describes the production, quality and tests of plastic gears made by fused filament fabrication (FFF). Different 3D printers of low and high quality and four different materials were tested: PLA, ABS, PA and PA carbon fiber composite. After optimizing the print parameters, various gears were manufactured and tested. The geometry and the test procedure were executed based on the VDI 2736 standard. This paper is a feasibility study of the fatigue strength of different gears. There is no material data set for the specific FFFMaterials and certain printers. The results show, that the quality of the printing process and the accuracy of the geometry are not responsible for the failure mode. The most important parameter is the friction coefficient of the different materials. Due to friction the tooth root will heat up and effect the material properties. PLA gears failed due to the low melting temperature, whereas ABS and PA gears failed on tooth root fracture. |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/20460 |
| Volltext Version: | Akzeptierte Version |
| Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
| Gesperrt bis: | 2021-09-01 |
| Departement: | School of Engineering |
| Organisationseinheit: | Institute of Product Development and Production Technologies (IPP) |
| Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
| Datei | Beschreibung | Größe | Format | |
|---|---|---|---|---|
| 2020_Dennig-etal_Feasibility-investigation-of-gears-manufactured-by-fused-filament-fabrication_AMPA.pdf | Accepted Version | 1.32 MB | Adobe PDF |  Öffnen/Anzeigen |
Zur Langanzeige
Dennig, H.-J., Zumofen, L., & Kirchheim, A. (2020). Feasibility investigation of gears manufactured by fused filament fabrication [Conference paper]. In M. Meboldt & C. Klahn (Eds.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020 (pp. 304–320). Springer. https://doi.org/10.1007/978-3-030-54334-1_22
Dennig, H.-J., Zumofen, L. and Kirchheim, A. (2020) ‘Feasibility investigation of gears manufactured by fused filament fabrication’, in M. Meboldt and C. Klahn (eds) Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Cham: Springer, pp. 304–320. Available at: https://doi.org/10.1007/978-3-030-54334-1_22.
H.-J. Dennig, L. Zumofen, and A. Kirchheim, “Feasibility investigation of gears manufactured by fused filament fabrication,” in Industrializing Additive Manufacturing : Proceedings of AMPA 2020, Sep. 2020, pp. 304–320. doi: 10.1007/978-3-030-54334-1_22.
DENNIG, Hans-Jörg, Livia ZUMOFEN und Andreas KIRCHHEIM, 2020. Feasibility investigation of gears manufactured by fused filament fabrication. In: Mirko MEBOLDT und Christoph KLAHN (Hrsg.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Conference paper. Cham: Springer. 1 September 2020. S. 304–320. ISBN 978-3-030-54333-4
Dennig, Hans-Jörg, Livia Zumofen, and Andreas Kirchheim. 2020. “Feasibility Investigation of Gears Manufactured by Fused Filament Fabrication.” Conference paper. In Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, 304–20. Cham: Springer. https://doi.org/10.1007/978-3-030-54334-1_22.
Dennig, Hans-Jörg, et al. “Feasibility Investigation of Gears Manufactured by Fused Filament Fabrication.” Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, Springer, 2020, pp. 304–20, https://doi.org/10.1007/978-3-030-54334-1_22.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.