1. ZHAW digitalcollection
  2. School of Engineering
  3. Publikationen
  4. Publikationen School of Engineering
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKirchheim, Andreas-
dc.contributor.authorZumofen, Livia-
dc.contributor.authorDennig, Hans-Jörg-
dc.date.accessioned2018-04-12T09:07:07Z-
dc.date.available2018-04-12T09:07:07Z-
dc.date.issued2017-
dc.identifier.isbn978-3-319-66865-9de_CH
dc.identifier.urihttps://digitalcollection.zhaw.ch/handle/11475/5217-
dc.description.abstractComplexity for free? This is one of the big advantages of additive manufacturing. But what does that mean in reality? In the case of additive manufacturing freedom in general is also a new restriction. For this reason, it needs appropriate education and further training to recognize the new possibilities and also the limits of the additive manufacturing. At the Centre for Product and Process Development (ZPP) of the Zurich University of Applied Sciences ZHAW, the additive production has been part of the training program for several years both in the teaching of mechanical engineering for students and in the continuing education of professionals. In this paper, the experiences with the new education and training modules "Additive Manufacturing" will be presented. The program includes theory and practice on the machines (AM Laboratory) including the economic and ecological aspects. In particular, a special semester-accompanying project work is carried out, in which the students learn the constructive and technological peculiarities of the product development up to the additive manufacturing process, after-treatment and quality control of the components. The education in bachelor degree relies on the problem-based learning concept, where the student learns about additive manufacturing through the experience of solving an open-ended problem.de_CH
dc.language.isodede_CH
dc.publisherSpringerde_CH
dc.rightsLicence according to publishing contractde_CH
dc.subjectAdditive Manufacturing Laboratoryde_CH
dc.subjectDesign Rulede_CH
dc.subjectEducation and Trainingde_CH
dc.subjectAdditive Manufacturingde_CH
dc.subject.ddc378: Hochschulbildungde_CH
dc.subject.ddc670: Industrielle und handwerkliche Fertigungde_CH
dc.titleWhy education and training in the field of additive manufacturing is a necessity : the right way to teach students and professionalsde_CH
dc.typeKonferenz: Paperde_CH
dcterms.typeTextde_CH
zhaw.departementSchool of Engineeringde_CH
zhaw.organisationalunitInstitute of Product Development and Production Technologies (IPP)de_CH
zhaw.publisher.placeChamde_CH
dc.identifier.doi10.1007/978-3-319-66866-6_31de_CH
zhaw.conference.detailsAMPA 2017, Zurich, 13-15 September 2017de_CH
zhaw.funding.euNode_CH
zhaw.originated.zhawYesde_CH
zhaw.pages.end336de_CH
zhaw.pages.start329de_CH
zhaw.parentwork.editorMeboldt, Mirko-
zhaw.parentwork.editorKlahn, Christoph-
zhaw.publication.statuspublishedVersionde_CH
zhaw.publication.reviewPeer review (Publikation)de_CH
zhaw.title.proceedingsIndustrializing Additive Manufacturing : Proceedings of Additive Manufacturing in Products and Applications - AMPA 2017 Zurichde_CH
zhaw.webfeedAdditive Manufacturingde_CH
Appears in collections:Publikationen School of Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record
Kirchheim, A., Zumofen, L., & Dennig, H.-J. (2017). Why education and training in the field of additive manufacturing is a necessity : the right way to teach students and professionals [Conference paper]. In M. Meboldt & C. Klahn (eds.), Industrializing Additive Manufacturing : Proceedings of Additive Manufacturing in Products and Applications - AMPA 2017 Zurich (pp. 329–336). Springer. https://doi.org/10.1007/978-3-319-66866-6_31
Kirchheim, A., Zumofen, L. and Dennig, H.-J. (2017) ‘Why education and training in the field of additive manufacturing is a necessity : the right way to teach students and professionals’, in M. Meboldt and C. Klahn (eds) Industrializing Additive Manufacturing : Proceedings of Additive Manufacturing in Products and Applications - AMPA 2017 Zurich. Cham: Springer, pp. 329–336. Available at: https://doi.org/10.1007/978-3-319-66866-6_31.
A. Kirchheim, L. Zumofen, and H.-J. Dennig, “Why education and training in the field of additive manufacturing is a necessity : the right way to teach students and professionals,” in Industrializing Additive Manufacturing : Proceedings of Additive Manufacturing in Products and Applications - AMPA 2017 Zurich, 2017, pp. 329–336. doi: 10.1007/978-3-319-66866-6_31.
KIRCHHEIM, Andreas, Livia ZUMOFEN und Hans-Jörg DENNIG, 2017. Why education and training in the field of additive manufacturing is a necessity : the right way to teach students and professionals. In: Mirko MEBOLDT und Christoph KLAHN (Hrsg.), Industrializing Additive Manufacturing : Proceedings of Additive Manufacturing in Products and Applications - AMPA 2017 Zurich. Conference paper. Cham: Springer. 2017. S. 329–336. ISBN 978-3-319-66865-9
Kirchheim, Andreas, Livia Zumofen, and Hans-Jörg Dennig. 2017. “Why education and training in the field of additive manufacturing is a necessity : the right way to teach students and professionals.” Conference paper. In Industrializing Additive Manufacturing : Proceedings of Additive Manufacturing in Products and Applications - AMPA 2017 Zurich, edited by Mirko Meboldt and Christoph Klahn, 329–36. Cham: Springer. https://doi.org/10.1007/978-3-319-66866-6_31.
Kirchheim, Andreas, et al. “Why education and training in the field of additive manufacturing is a necessity : the right way to teach students and professionals.” Industrializing Additive Manufacturing : Proceedings of Additive Manufacturing in Products and Applications - AMPA 2017 Zurich, edited by Mirko Meboldt and Christoph Klahn, Springer, 2017, pp. 329–36, https://doi.org/10.1007/978-3-319-66866-6_31.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.