| Publikationstyp: | Beitrag in wissenschaftlicher Zeitschrift |
| Art der Begutachtung: | Peer review (Publikation) |
| Titel: | A cost effective and reliable method to predict mechanical stress in single-use and standard pumps |
| Autor/-in: | Dittler, Ina Dornfeld, Wolfgang Schöb, Reto Cocke, Jared Rojahn, Jürgen Kraume, Matthias Eibl, Dieter |
| DOI: | 10.3791/53052 |
| Erschienen in: | Journal of Visualized Experiments |
| Erscheinungsdatum: | 5-Aug-2015 |
| Verlag / Hrsg. Institution: | JoVE |
| ISSN: | 1940-087X |
| Sprache: | Englisch |
| Fachgebiet (DDC): | 620: Ingenieurwesen |
| Zusammenfassung: | Pumps are mainly used when transferring sterile culture broths in biopharmaceutical and biotechnological production processes. However, during the pumping process shear forces occur which can lead to qualitative and/or quantitative product loss. To calculate the mechanical stress with limited experimental expense, an oil-water emulsion system was used, whose suitability was demonstrated for drop size detections in bioreactors. As drop breakup of the oil-water emulsion system is a function of mechanical stress, drop sizes need to be counted over the experimental time of shear stress investigations. In previous studies, the inline endoscopy has been shown to be an accurate and reliable measurement technique for drop size detections in liquid/liquid dispersions. The aim of this protocol is to show the suitability of the inline endoscopy technique for drop size measurements in pumping processes. In order to express the drop size, the Sauter mean diameter d32 was used as the representative diameter of drops in the oil-water emulsion. The results showed low variation in the Sauter mean diameters, which were quantified by standard deviations of below 15%, indicating the reliability of the measurement technique. |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/2343 |
| Volltext Version: | Publizierte Version |
| Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
| Departement: | Life Sciences und Facility Management |
| Enthalten in den Sammlungen: | Publikationen Life Sciences und Facility Management |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Dittler, I., Dornfeld, W., Schöb, R., Cocke, J., Rojahn, J., Kraume, M., & Eibl, D. (2015). A cost effective and reliable method to predict mechanical stress in single-use and standard pumps. Journal of Visualized Experiments. https://doi.org/10.3791/53052
Dittler, I. et al. (2015) ‘A cost effective and reliable method to predict mechanical stress in single-use and standard pumps’, Journal of Visualized Experiments [Preprint]. Available at: https://doi.org/10.3791/53052.
I. Dittler et al., “A cost effective and reliable method to predict mechanical stress in single-use and standard pumps,” Journal of Visualized Experiments, Aug. 2015, doi: 10.3791/53052.
DITTLER, Ina, Wolfgang DORNFELD, Reto SCHÖB, Jared COCKE, Jürgen ROJAHN, Matthias KRAUME und Dieter EIBL, 2015. A cost effective and reliable method to predict mechanical stress in single-use and standard pumps. Journal of Visualized Experiments. 5 August 2015. DOI 10.3791/53052
Dittler, Ina, Wolfgang Dornfeld, Reto Schöb, Jared Cocke, Jürgen Rojahn, Matthias Kraume, and Dieter Eibl. 2015. “A Cost Effective and Reliable Method to Predict Mechanical Stress in Single-Use and Standard Pumps.” Journal of Visualized Experiments, August. https://doi.org/10.3791/53052.
Dittler, Ina, et al. “A Cost Effective and Reliable Method to Predict Mechanical Stress in Single-Use and Standard Pumps.” Journal of Visualized Experiments, Aug. 2015, https://doi.org/10.3791/53052.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.