1. ZHAW digitalcollection
  2. School of Engineering
  3. Publikationen
  4. Publikationen School of Engineering
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHöller, Anton-
dc.contributor.authorZumofen, Livia-
dc.contributor.authorKirchheim, Andreas-
dc.contributor.authorDinner, Hanspeter-
dc.contributor.authorDennig, Hans-Jörg-
dc.date.accessioned2020-09-10T16:53:51Z-
dc.date.available2020-09-10T16:53:51Z-
dc.date.issued2020-09-01-
dc.identifier.isbn978-3-030-54333-4de_CH
dc.identifier.isbn978-3-030-54334-1de_CH
dc.identifier.urihttps://digitalcollection.zhaw.ch/handle/11475/20459-
dc.description.abstractThis paper shows how the interdisciplinary use of additive manufacturing (AM) and topology optimization (TO) lead to a better load distribution and a related increase in performance within a planetary gearbox. For this, it has been investigated how to use TO for designing the flexible support of the planets pin and to reduce thereby the load sharing factor (Kγ). 18 digital experiments were performed to evaluate the best setting for this TO. A completely new shape for a “flexpin” design was found which offers significant advantages in terms of compliance and misalignment for the flexible support structure of planet gears. Because of AM, the focus can stay on the main function of the flexpin including the component reduction. Critical interfaces are no longer necessary. This allows a much better definition of the compliance, an improved assembling, and a safer operation. The best TO-design concept was selected and edited for additive manufacturing. The final validation by FEM showed an increase in load capacity by 13% and an additional reduction of the misalignment of 77%.de_CH
dc.language.isoende_CH
dc.publisherSpringerde_CH
dc.rightsLicence according to publishing contractde_CH
dc.subjectAdditive manufacturingde_CH
dc.subjectStructural optimizationde_CH
dc.subjectFlexpinde_CH
dc.subjectPlanetary gearboxde_CH
dc.subjectLoad distributionde_CH
dc.subjectLaser Powder Bed Fusion (L-PBF)de_CH
dc.subject.ddc670: Industrielle und handwerkliche Fertigungde_CH
dc.titleAdditive manufactured and topology optimized flexpin for planetary gearsde_CH
dc.typeKonferenz: Paperde_CH
dcterms.typeTextde_CH
zhaw.departementSchool of Engineeringde_CH
zhaw.organisationalunitInstitute of Product Development and Production Technologies (IPP)de_CH
zhaw.publisher.placeChamde_CH
dc.identifier.doi10.1007/978-3-030-54334-1_24de_CH
zhaw.conference.details2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020de_CH
zhaw.funding.euNode_CH
zhaw.originated.zhawYesde_CH
zhaw.pages.end356de_CH
zhaw.pages.start337de_CH
zhaw.parentwork.editorMeboldt, Mirko-
zhaw.parentwork.editorKlahn, Christoph-
zhaw.publication.statuspublishedVersionde_CH
zhaw.publication.reviewPeer review (Publikation)de_CH
zhaw.title.proceedingsIndustrializing Additive Manufacturing : Proceedings of AMPA 2020de_CH
zhaw.webfeedAdditive Manufacturingde_CH
zhaw.author.additionalNode_CH
zhaw.display.portraitYesde_CH
Appears in collections:Publikationen School of Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record
Höller, A., Zumofen, L., Kirchheim, A., Dinner, H., & Dennig, H.-J. (2020). Additive manufactured and topology optimized flexpin for planetary gears [Conference paper]. In M. Meboldt & C. Klahn (Eds.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020 (pp. 337–356). Springer. https://doi.org/10.1007/978-3-030-54334-1_24
Höller, A. et al. (2020) ‘Additive manufactured and topology optimized flexpin for planetary gears’, in M. Meboldt and C. Klahn (eds) Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Cham: Springer, pp. 337–356. Available at: https://doi.org/10.1007/978-3-030-54334-1_24.
A. Höller, L. Zumofen, A. Kirchheim, H. Dinner, and H.-J. Dennig, “Additive manufactured and topology optimized flexpin for planetary gears,” in Industrializing Additive Manufacturing : Proceedings of AMPA 2020, Sep. 2020, pp. 337–356. doi: 10.1007/978-3-030-54334-1_24.
HÖLLER, Anton, Livia ZUMOFEN, Andreas KIRCHHEIM, Hanspeter DINNER und Hans-Jörg DENNIG, 2020. Additive manufactured and topology optimized flexpin for planetary gears. In: Mirko MEBOLDT und Christoph KLAHN (Hrsg.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Conference paper. Cham: Springer. 1 September 2020. S. 337–356. ISBN 978-3-030-54333-4
Höller, Anton, Livia Zumofen, Andreas Kirchheim, Hanspeter Dinner, and Hans-Jörg Dennig. 2020. “Additive Manufactured and Topology Optimized Flexpin for Planetary Gears.” Conference paper. In Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, 337–56. Cham: Springer. https://doi.org/10.1007/978-3-030-54334-1_24.
Höller, Anton, et al. “Additive Manufactured and Topology Optimized Flexpin for Planetary Gears.” Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, Springer, 2020, pp. 337–56, https://doi.org/10.1007/978-3-030-54334-1_24.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.