| Publikationstyp: | Konferenz: Sonstiges |
| Art der Begutachtung: | Peer review (Abstract) |
| Titel: | Selective laser melting of a high-strength aluminium alloy |
| Autor/-in: | Zumofen, Livia Kirchheim, Andreas |
| et. al: | No |
| Tagungsband: | AAMS2019: Alloys for Additive Manufacturing Symposium : book of abstracts |
| Seite(n): | 81 |
| Angaben zur Konferenz: | AAMS2019, Gothenburg, Sweden, 18-20 September 2019 |
| Erscheinungsdatum: | 2019 |
| Verlag / Hrsg. Institution: | Chalmers University of Technology |
| Verlag / Hrsg. Institution: | Gothenburg |
| Sprache: | Englisch |
| Schlagwörter: | Selective laser melting; Aluminium alloy; EN AW 7075; High quality |
| Fachgebiet (DDC): | 670: Industrielle und handwerkliche Fertigung |
| Zusammenfassung: | Additive manufacturing (AM) of highly complex three-dimensional metal structures using selective laser melting (SLM) is increasingly gaining interest in numerous fields of application. The new design freedom combined with enhanced lightweight design methods shows an enormous potential, especially in the aerospace industry. Thereby, metal alloys with a high strength to weight ratio play an important role. Although several titanium and aluminium alloys have been SLM-processed successfully, the high strength-aluminium alloy EN AW 7075 remains a challenge. The major challenge in SLM processing of EN AW 7075 is the high sensitivity to hot cracks due to process related temperature gradients and rapid solidification. Preheating represents a promising approach to reduce temperature gradients and minimize shrinking between the layers. This investigation focuses on optimum SLM process parameters and reduction of hot cracking of EN AW 7075. In the first step, hot crack formation was evaluated from single track experiments to identify the most promising range of laser parameters. Subsequently, multi-layer parameter studies were carried using EN AW 7075 powder and preheating of up to 350 °C. |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/18358 |
| Volltext Version: | Publizierte Version |
| Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
| Departement: | School of Engineering |
| Organisationseinheit: | Institute of Product Development and Production Technologies (IPP) |
| Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Zumofen, L., & Kirchheim, A. (2019). Selective laser melting of a high-strength aluminium alloy [Conference presentation]. AAMS2019: Alloys for Additive Manufacturing Symposium : Book of Abstracts, 81.
Zumofen, L. and Kirchheim, A. (2019) ‘Selective laser melting of a high-strength aluminium alloy’, in AAMS2019: Alloys for Additive Manufacturing Symposium : book of abstracts. Gothenburg: Chalmers University of Technology, p. 81.
L. Zumofen and A. Kirchheim, “Selective laser melting of a high-strength aluminium alloy,” in AAMS2019: Alloys for Additive Manufacturing Symposium : book of abstracts, 2019, p. 81.
ZUMOFEN, Livia und Andreas KIRCHHEIM, 2019. Selective laser melting of a high-strength aluminium alloy. In: AAMS2019: Alloys for Additive Manufacturing Symposium : book of abstracts. Conference presentation. Gothenburg: Chalmers University of Technology. 2019. S. 81
Zumofen, Livia, and Andreas Kirchheim. 2019. “Selective Laser Melting of a High-Strength Aluminium Alloy.” Conference presentation. In AAMS2019: Alloys for Additive Manufacturing Symposium : Book of Abstracts, 81. Gothenburg: Chalmers University of Technology.
Zumofen, Livia, and Andreas Kirchheim. “Selective Laser Melting of a High-Strength Aluminium Alloy.” AAMS2019: Alloys for Additive Manufacturing Symposium : Book of Abstracts, Chalmers University of Technology, 2019, p. 81.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.