Publikationstyp: Beitrag in wissenschaftlicher Zeitschrift
Art der Begutachtung: Peer review (Publikation)
Titel: Analysis of membrane electrode assembly (MEA) by environmental scanning electron microscope (ESEM)
Autor/-in: Yu, Hong Mei
Schumacher, Jürgen
Zobel, Marco
Hebling, Christopher
DOI: 10.1016/j.jpowsour.2004.12.069
Erschienen in: Journal of Power Sources
Band(Heft): 145
Heft: 2
Seite(n): 216
Seiten bis: 222
Erscheinungsdatum: 18-Aug-2005
Verlag / Hrsg. Institution: Elsevier
ISSN: 0378-7753
1873-2755
Sprache: Englisch
Schlagwörter: Pefc; Fuel cells; Environmental scanning microscope
Fachgebiet (DDC): 621.3: Elektro-, Kommunikations-, Steuerungs- und Regelungstechnik
Zusammenfassung: To date, the available equipment for characterising the microstructure of membrane electrode assembly (MEA) is still not well developed. For example, applying the normal scanning electron microscope (SEM) only provides information on the dry structure of MEAs. This paper presents a microstructure analysis method of MEAs in proton exchange membrane fuel cells (PEMFC). The microstructure analysis in this paper utilises the environmental scanning electron microscope (ESEM), which shows its advantage on the sample microstructure analysis in wet mode. When water is present, the characteristics of the MEA, especially the hydrophobic and/or hydrophilic properties, are distinguishable on the ESEM images. With proper temperature and pressure control, the water distribution within both the membrane and the catalyst layer can be viewed by ESEM. Based on ESEM measurement and mercury porosity measurement, the distributions of hydrophobic and hydrophilic pores in MEA have been analyzed. By means of ESEM and energy dispersive X-ray (EDX), a degraded MEA is characterized. The microstructure change of the degraded MEA has been discussed. The results provide helpful information for the understanding of MEAs in PEMFC.
URI: https://digitalcollection.zhaw.ch/handle/11475/11604
Volltext Version: Publizierte Version
Lizenz (gemäss Verlagsvertrag): Lizenz gemäss Verlagsvertrag
Departement: School of Engineering
Organisationseinheit: Institute of Computational Physics (ICP)
Enthalten in den Sammlungen:Publikationen School of Engineering

Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Yu, H. M., Schumacher, J., Zobel, M., & Hebling, C. (2005). Analysis of membrane electrode assembly (MEA) by environmental scanning electron microscope (ESEM). Journal of Power Sources, 145(2), 216–222. https://doi.org/10.1016/j.jpowsour.2004.12.069
Yu, H.M. et al. (2005) ‘Analysis of membrane electrode assembly (MEA) by environmental scanning electron microscope (ESEM)’, Journal of Power Sources, 145(2), pp. 216–222. Available at: https://doi.org/10.1016/j.jpowsour.2004.12.069.
H. M. Yu, J. Schumacher, M. Zobel, and C. Hebling, “Analysis of membrane electrode assembly (MEA) by environmental scanning electron microscope (ESEM),” Journal of Power Sources, vol. 145, no. 2, pp. 216–222, Aug. 2005, doi: 10.1016/j.jpowsour.2004.12.069.
YU, Hong Mei, Jürgen SCHUMACHER, Marco ZOBEL und Christopher HEBLING, 2005. Analysis of membrane electrode assembly (MEA) by environmental scanning electron microscope (ESEM). Journal of Power Sources. 18 August 2005. Bd. 145, Nr. 2, S. 216–222. DOI 10.1016/j.jpowsour.2004.12.069
Yu, Hong Mei, Jürgen Schumacher, Marco Zobel, and Christopher Hebling. 2005. “Analysis of Membrane Electrode Assembly (MEA) by Environmental Scanning Electron Microscope (ESEM).” Journal of Power Sources 145 (2): 216–22. https://doi.org/10.1016/j.jpowsour.2004.12.069.
Yu, Hong Mei, et al. “Analysis of Membrane Electrode Assembly (MEA) by Environmental Scanning Electron Microscope (ESEM).” Journal of Power Sources, vol. 145, no. 2, Aug. 2005, pp. 216–22, https://doi.org/10.1016/j.jpowsour.2004.12.069.


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.