Please use this identifier to cite or link to this item: https://doi.org/10.21256/zhaw-4817
Publication type: Conference paper
Type of review: Peer review (publication)
Title: Integration of FM and asset management expertise in digital 3D building models
Authors: Ashworth, Simon
Druhmann, Carsten K.
DOI: 10.21256/zhaw-4817
Published in: Journal für Facility Management
Volume(Issue): 2015
Issue: 10
Pages: 40
Pages to: 54
Conference details: 7th Internationalen Facility Management Congress, Wien, Österreich 20.-21. November 2014
Issue Date: 2015
Publisher / Ed. Institution: Technische Universität Wien
ISSN: 2520-5404
Language: English
Subjects: Building Information Modelling); Facility Management; 3D laser scanning
Subject (DDC): 658.2: Facility Management
690: Building and construction
Abstract: Purpose: The research establishes a Conceptual Process Model (CPM) as shown in Figure 1 which shows how Facility Management (FM) and Asset Management (AM) know-how, 3D laser scanning and Building Information Modelling (BIM) can be combined with virtual design and simulation techniques to help managers make better decisions about feasibility report options and to add value and optimize existing buildings performance and quality. Design methodology and approach: Mixed methods were used including a review of BIM literature and industry best practice. Seven semi-structured interviews were held with stakeholders from different stages in the BIM process. The initial CPM was subsequently refined during the research project based on feedback from the interviews. The 3D laser scanning element of the CPM was tested using two ZHAW university buildings and the findings triangulated with a feedback mechanism to further improve the model. Originality and findings: The findings helped to develop a model which can be used by key stakeholders as a guide when considering the integration of FM and AM know-how, with 3D scanning in the creation of a BIM model for existing buildings, which constitute approximately 98% of the building stock. The focus is on combining existing know-how with the BIM process and simulation techniques to identify, simulate and evaluate the best building improvement options for feasibility reports prior to a decision to proceed. The CPM meets the need to develop a workflow with a focus on digitalisation of the existing built environment and creation of appropriate BIM model(s). The models can then be used for simulation purposes looking at cost benefit optimisation, energy efficiency, life cycle costing (LCC) etc. as well as creating virtual walk through models that can be viewed by end users, Facility Managers (FMs) and Asset Managers (AMs) to improve workplace environments and FM and AM operation.
URI: https://digitalcollection.zhaw.ch/handle/11475/11100
Fulltext version: Published version
License (according to publishing contract): CC BY-NC 2.0: Attribution - Non commercial 2.0 Generic
Departement: Life Sciences and Facility Management
Organisational Unit: Institute of Facility Management (IFM)
Appears in collections:Publikationen Life Sciences und Facility Management

Files in This Item:
File Description SizeFormat 
2015_Ashworth_Integration_of_FM_and_asset_management_expertise.pdf1.04 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.