1. ZHAW digitalcollection
  2. School of Engineering
  3. Publikationen
  4. Publikationen School of Engineering
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKirrmann, Hubert-
dc.contributor.authorKleineberg, Oliver-
dc.contributor.authorWeber, Karl-
dc.contributor.authorWeibel, Hans-
dc.date.accessioned2018-09-20T13:39:49Z-
dc.date.available2018-09-20T13:39:49Z-
dc.date.issued2011-
dc.identifier.urihttps://digitalcollection.zhaw.ch/handle/11475/10909-
dc.description.abstractNumerous Industrial Ethernets are standardized in IEC 61158 – IEC 61784. Few provide network redundancy and none provides a redundancy method that is independent of the upper layer protocols. To provide protocol-independent redundancy in (substation) automation networks, IEC SC65C working group 15 produced the IEC 62439 standard series that defines redundancy methods in switched Ethernet networks applicable to a variety of industrial networks, with different solutions depending on the real-time behaviour and on the level of redundancy desired. This paper describes IEC 62439-3 Clause 5 (HSR), a redundancy method applicable to hard real time systems, based on full duplication of the transmitted information and flooding of the network, with recognition and removal of duplicates in each node. This method is applied to a ring, but can be extended to more complex topologies, in particular rings of rings. Its first application is in substation automation based on the IEC 61850 standard which references HSR for applications where redundancy is required.de_CH
dc.language.isoende_CH
dc.rightsLicence according to publishing contractde_CH
dc.subjectHigh-availability Seamless Redundancyde_CH
dc.subjectSubstation Automationde_CH
dc.subjectZero Loss Redundancyde_CH
dc.subject.ddc620: Ingenieurwesende_CH
dc.titleSeamless and low-cost redundancy for substation automation systemsde_CH
dc.typeKonferenz: Paperde_CH
dcterms.typeTextde_CH
zhaw.departementSchool of Engineeringde_CH
zhaw.organisationalunitInstitute of Embedded Systems (InES)de_CH
zhaw.conference.detailsIEEE Power and Engineering Society (PES) General Meeting, Detroit, USA, 25 July 2011de_CH
zhaw.funding.euNode_CH
zhaw.originated.zhawYesde_CH
zhaw.publication.statuspublishedVersionde_CH
zhaw.publication.reviewPeer review (Publikation)de_CH
Appears in collections:Publikationen School of Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record
Kirrmann, H., Kleineberg, O., Weber, K., & Weibel, H. (2011). Seamless and low-cost redundancy for substation automation systems. IEEE Power and Engineering Society (PES) General Meeting, Detroit, USA, 25 July 2011.
Kirrmann, H. et al. (2011) ‘Seamless and low-cost redundancy for substation automation systems’, in IEEE Power and Engineering Society (PES) General Meeting, Detroit, USA, 25 July 2011.
H. Kirrmann, O. Kleineberg, K. Weber, and H. Weibel, “Seamless and low-cost redundancy for substation automation systems,” in IEEE Power and Engineering Society (PES) General Meeting, Detroit, USA, 25 July 2011, 2011.
KIRRMANN, Hubert, Oliver KLEINEBERG, Karl WEBER und Hans WEIBEL, 2011. Seamless and low-cost redundancy for substation automation systems. In: IEEE Power and Engineering Society (PES) General Meeting, Detroit, USA, 25 July 2011. Conference paper. 2011
Kirrmann, Hubert, Oliver Kleineberg, Karl Weber, and Hans Weibel. 2011. “Seamless and Low-Cost Redundancy for Substation Automation Systems.” Conference paper. In IEEE Power and Engineering Society (PES) General Meeting, Detroit, USA, 25 July 2011.
Kirrmann, Hubert, et al. “Seamless and Low-Cost Redundancy for Substation Automation Systems.” IEEE Power and Engineering Society (PES) General Meeting, Detroit, USA, 25 July 2011, 2011.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.