1. ZHAW digitalcollection
  2. School of Engineering
  3. Publikationen
  4. Publikationen School of Engineering
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSiegmann, Konstantin-
dc.contributor.authorMosch, Andreas-
dc.contributor.authorCarlesso, Alessandro-
dc.contributor.authorWinkler, Martin-
dc.date.accessioned2018-08-08T08:06:45Z-
dc.date.available2018-08-08T08:06:45Z-
dc.date.issued2015-
dc.identifier.issn0043-1648de_CH
dc.identifier.urihttps://digitalcollection.zhaw.ch/handle/11475/8891-
dc.description.abstractA screening program to investigate the stability of plastics against wet abrasion was conducted. Plastic discs were spun in solvent/corundum suspensions at high speed and their wear was determined. Nine different plastics were investigated in water/corundum suspensions, and the three most stable were chosen for further studies in other liquids. Five common solvents were used to prepare corundum suspensions in which ultra-high molecular weight polyethylene, polyurethane 90Shore A and polyamide 6 discs were spun and abraded. Here we show that abrasion is solvent dependent. The abrasive power of the corundum/solvent mixture decreases as follows: methyl ethyl ketone>ethyl acetate>butyl acetate>water>isopropanol>ethanol, on average for the three plastics. The suspensions with solvents containing carbonyl groups display higher abrasive power than the ones with hydroxyl groups. For polyurethane the above ranking could be linked to swelling. For this polymer, a correlation exists between the degree of swelling and the abrasion in the respective solvent. The polymer with the best abrasion resistance in the suspensions tested is ultra-high molecular weight polyethylene.de_CH
dc.language.isoende_CH
dc.publisherElsevierde_CH
dc.relation.ispartofWearde_CH
dc.rightsLicence according to publishing contractde_CH
dc.subjectTwo-body abrasionde_CH
dc.subjectPolymersde_CH
dc.subjectWear testingde_CH
dc.subject.ddc620.11: Werkstoffede_CH
dc.titleAbrasive wear of selected plastics in solvent/corundum suspensionsde_CH
dc.typeBeitrag in wissenschaftlicher Zeitschriftde_CH
dcterms.typeTextde_CH
zhaw.departementSchool of Engineeringde_CH
zhaw.organisationalunitInstitute of Materials and Process Engineering (IMPE)de_CH
dc.identifier.doi10.1016/j.wear.2014.12.020de_CH
zhaw.funding.euNode_CH
zhaw.originated.zhawYesde_CH
zhaw.pages.end121de_CH
zhaw.pages.start118de_CH
zhaw.publication.statuspublishedVersionde_CH
zhaw.volume324-325de_CH
zhaw.publication.reviewPeer review (Publikation)de_CH
zhaw.webfeedPolymere Beschichtungende_CH
Appears in collections:Publikationen School of Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record
Siegmann, K., Mosch, A., Carlesso, A., & Winkler, M. (2015). Abrasive wear of selected plastics in solvent/corundum suspensions. Wear, 324-325, 118–121. https://doi.org/10.1016/j.wear.2014.12.020
Siegmann, K. et al. (2015) ‘Abrasive wear of selected plastics in solvent/corundum suspensions’, Wear, 324-325, pp. 118–121. Available at: https://doi.org/10.1016/j.wear.2014.12.020.
K. Siegmann, A. Mosch, A. Carlesso, and M. Winkler, “Abrasive wear of selected plastics in solvent/corundum suspensions,” Wear, vol. 324-325, pp. 118–121, 2015, doi: 10.1016/j.wear.2014.12.020.
SIEGMANN, Konstantin, Andreas MOSCH, Alessandro CARLESSO und Martin WINKLER, 2015. Abrasive wear of selected plastics in solvent/corundum suspensions. Wear. 2015. Bd. 324-325, S. 118–121. DOI 10.1016/j.wear.2014.12.020
Siegmann, Konstantin, Andreas Mosch, Alessandro Carlesso, and Martin Winkler. 2015. “Abrasive Wear of Selected Plastics in Solvent/Corundum Suspensions.” Wear 324-325: 118–21. https://doi.org/10.1016/j.wear.2014.12.020.
Siegmann, Konstantin, et al. “Abrasive Wear of Selected Plastics in Solvent/Corundum Suspensions.” Wear, vol. 324-325, 2015, pp. 118–21, https://doi.org/10.1016/j.wear.2014.12.020.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.