Publikationstyp: | Konferenz: Paper |
Art der Begutachtung: | Peer review (Publikation) |
Titel: | Delay identification in thermoacoustics |
Autor/-in: | Gant, Francesco Ghirardo, Giulio Cuquel, Alexis Bothien, Mirko |
et. al: | No |
DOI: | 10.1115/GT2021-58903 |
Tagungsband: | Proceedings of the ASME 2021 Turbo Expo |
Angaben zur Konferenz: | ASME 2021 Turbo Expo (Turbomachinery Technical Conference & Exposition), Online, 7-11 June 2021 |
Erscheinungsdatum: | 16-Sep-2021 |
Verlag / Hrsg. Institution: | ASME |
Andere Identifier: | GT2021-58903 |
Sprache: | Englisch |
Schlagwörter: | Thermoacoustics; System identification; Delay |
Fachgebiet (DDC): | 530: Physik 620: Ingenieurwesen |
Zusammenfassung: | The stability of thermoacoustic systems is often regulated by the time delay between acoustic perturbations and corresponding heat release fluctuations. An accurate estimate of this value is of great importance in applications, since even small modifications can introduce significant changes in the system behavior. Different studies show that the nonlinear delayed dynamics typical of these systems can be well captured with low-order models. In the present work, a method is introduced to estimate the most likely value of the time delay of a single thermoacoustic mode from a measured acoustic pressure signal. The mode of interest is modeled by an oscillator equation, with a nonlinear delayed forcing term modeling the deterministic flame contribution and an additive white Gaussian noise to embed the stochastic combustion noise. Additionally, other thermoacoustic relevant parameters are estimated. The model accounts for a flame gain, for a flame saturation coefficient, for a linear acoustic damping and for the background combustion noise intensity. The pressure data time series is statistically analyzed and the set of unknown parameters is identified. Validation is performed with respect to synthetically generated time series and low order model simulations, for which the underlying delay is known a priori. A discussion follows about the accuracy of the method, in particular a comparison with existing methods is drawn. |
URI: | https://digitalcollection.zhaw.ch/handle/11475/22655 |
Volltext Version: | Publizierte Version |
Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
Departement: | School of Engineering |
Organisationseinheit: | Institut für Energiesysteme und Fluid-Engineering (IEFE) |
Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Gant, F., Ghirardo, G., Cuquel, A., & Bothien, M. (2021, September 16). Delay identification in thermoacoustics. Proceedings of the ASME 2021 Turbo Expo. https://doi.org/10.1115/GT2021-58903
Gant, F. et al. (2021) ‘Delay identification in thermoacoustics’, in Proceedings of the ASME 2021 Turbo Expo. ASME. Available at: https://doi.org/10.1115/GT2021-58903.
F. Gant, G. Ghirardo, A. Cuquel, and M. Bothien, “Delay identification in thermoacoustics,” in Proceedings of the ASME 2021 Turbo Expo, Sep. 2021. doi: 10.1115/GT2021-58903.
GANT, Francesco, Giulio GHIRARDO, Alexis CUQUEL und Mirko BOTHIEN, 2021. Delay identification in thermoacoustics. In: Proceedings of the ASME 2021 Turbo Expo. Conference paper. ASME. 16 September 2021
Gant, Francesco, Giulio Ghirardo, Alexis Cuquel, and Mirko Bothien. 2021. “Delay Identification in Thermoacoustics.” Conference paper. In Proceedings of the ASME 2021 Turbo Expo. ASME. https://doi.org/10.1115/GT2021-58903.
Gant, Francesco, et al. “Delay Identification in Thermoacoustics.” Proceedings of the ASME 2021 Turbo Expo, ASME, 2021, https://doi.org/10.1115/GT2021-58903.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.