| Publikationstyp: | Konferenz: Paper |
| Art der Begutachtung: | Peer review (Publikation) |
| Titel: | Additive manufactured and topology optimized flexpin for planetary gears |
| Autor/-in: | Höller, Anton Zumofen, Livia Kirchheim, Andreas Dinner, Hanspeter Dennig, Hans-Jörg |
| et. al: | No |
| DOI: | 10.1007/978-3-030-54334-1_24 |
| Tagungsband: | Industrializing Additive Manufacturing : Proceedings of AMPA 2020 |
| Herausgeber/-in des übergeordneten Werkes: | Meboldt, Mirko Klahn, Christoph |
| Seite(n): | 337 |
| Seiten bis: | 356 |
| Angaben zur Konferenz: | 2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020 |
| Erscheinungsdatum: | 1-Sep-2020 |
| Verlag / Hrsg. Institution: | Springer |
| Verlag / Hrsg. Institution: | Cham |
| ISBN: | 978-3-030-54333-4 978-3-030-54334-1 |
| Sprache: | Englisch |
| Schlagwörter: | Additive manufacturing; Structural optimization; Flexpin; Planetary gearbox; Load distribution; Laser Powder Bed Fusion (L-PBF) |
| Fachgebiet (DDC): | 670: Industrielle und handwerkliche Fertigung |
| Zusammenfassung: | This paper shows how the interdisciplinary use of additive manufacturing (AM) and topology optimization (TO) lead to a better load distribution and a related increase in performance within a planetary gearbox. For this, it has been investigated how to use TO for designing the flexible support of the planets pin and to reduce thereby the load sharing factor (Kγ). 18 digital experiments were performed to evaluate the best setting for this TO. A completely new shape for a “flexpin” design was found which offers significant advantages in terms of compliance and misalignment for the flexible support structure of planet gears. Because of AM, the focus can stay on the main function of the flexpin including the component reduction. Critical interfaces are no longer necessary. This allows a much better definition of the compliance, an improved assembling, and a safer operation. The best TO-design concept was selected and edited for additive manufacturing. The final validation by FEM showed an increase in load capacity by 13% and an additional reduction of the misalignment of 77%. |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/20459 |
| Volltext Version: | Publizierte Version |
| Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
| Departement: | School of Engineering |
| Organisationseinheit: | Institute of Product Development and Production Technologies (IPP) |
| Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Es gibt keine Dateien zu dieser Ressource.
Zur Langanzeige
Höller, A., Zumofen, L., Kirchheim, A., Dinner, H., & Dennig, H.-J. (2020). Additive manufactured and topology optimized flexpin for planetary gears [Conference paper]. In M. Meboldt & C. Klahn (Eds.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020 (pp. 337–356). Springer. https://doi.org/10.1007/978-3-030-54334-1_24
Höller, A. et al. (2020) ‘Additive manufactured and topology optimized flexpin for planetary gears’, in M. Meboldt and C. Klahn (eds) Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Cham: Springer, pp. 337–356. Available at: https://doi.org/10.1007/978-3-030-54334-1_24.
A. Höller, L. Zumofen, A. Kirchheim, H. Dinner, and H.-J. Dennig, “Additive manufactured and topology optimized flexpin for planetary gears,” in Industrializing Additive Manufacturing : Proceedings of AMPA 2020, Sep. 2020, pp. 337–356. doi: 10.1007/978-3-030-54334-1_24.
HÖLLER, Anton, Livia ZUMOFEN, Andreas KIRCHHEIM, Hanspeter DINNER und Hans-Jörg DENNIG, 2020. Additive manufactured and topology optimized flexpin for planetary gears. In: Mirko MEBOLDT und Christoph KLAHN (Hrsg.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Conference paper. Cham: Springer. 1 September 2020. S. 337–356. ISBN 978-3-030-54333-4
Höller, Anton, Livia Zumofen, Andreas Kirchheim, Hanspeter Dinner, and Hans-Jörg Dennig. 2020. “Additive Manufactured and Topology Optimized Flexpin for Planetary Gears.” Conference paper. In Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, 337–56. Cham: Springer. https://doi.org/10.1007/978-3-030-54334-1_24.
Höller, Anton, et al. “Additive Manufactured and Topology Optimized Flexpin for Planetary Gears.” Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, Springer, 2020, pp. 337–56, https://doi.org/10.1007/978-3-030-54334-1_24.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.