Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen:
https://doi.org/10.21256/zhaw-19665
Publikationstyp: | Beitrag in wissenschaftlicher Zeitschrift |
Art der Begutachtung: | Peer review (Publikation) |
Titel: | Analysis of an active charge balancing method based on a single non-isolated DC/DC converter |
Autor/-in: | Räber, Manuel Heinzelmann, Andreas Ould Abdeslam, Djaffar |
et. al: | No |
DOI: | 10.1109/TIE.2020.2972449 10.21256/zhaw-19665 |
Erschienen in: | IEEE Transactions on Industrial Electronics |
Erscheinungsdatum: | 2020 |
Verlag / Hrsg. Institution: | IEEE |
ISSN: | 0278-0046 1557-9948 |
Sprache: | Englisch |
Schlagwörter: | Active balancing; Battery management system; Lithium-ion battery |
Fachgebiet (DDC): | 621.3: Elektro-, Kommunikations-, Steuerungs- und Regelungstechnik |
Zusammenfassung: | For lithium-ion batteries, active balancing can bring advantages compared to passive balancing in terms of lifetime and available capacity. Most known balancing techniques suffer from a low efficiency or high complexity and cost. This paper proposes a new technical solution based on a non-isolated DC/DC converter and a low-speed switching matrix to overcome efficiency and power limitations of present balancing methods. The proposed circuit allows balancing current paths which are not possible with previous methods and results in balancing efficiencies of over 90%. The performance comparison is based on batch numerical simulations using calculated and measured efficiency values. The simulation results are compared to the approved active balancing method cell-to-cell and to passive balancing. A study case with eight randomly distributed battery cells shows an improvement in overall balancing efficiency of up to 47.4% and a reduction in balancing time of up to 36.9%. The available capacity increases from 97.2% in a passively balanced system to 99.7% for the new method. A hardware prototype was set up to demonstrate the working principle and to verify the numerical simulations. |
Weitere Angaben: | © 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. |
URI: | https://digitalcollection.zhaw.ch/handle/11475/19665 |
Volltext Version: | Akzeptierte Version |
Lizenz (gemäss Verlagsvertrag): | Lizenz gemäss Verlagsvertrag |
Departement: | School of Engineering |
Organisationseinheit: | Institut für Energiesysteme und Fluid-Engineering (IEFE) |
Enthalten in den Sammlungen: | Publikationen School of Engineering |
Dateien zu dieser Ressource:
Datei | Beschreibung | Größe | Format | |
---|---|---|---|---|
2020_Raeber-etal_Active-Charge.pdf | Accepted Version | 2.03 MB | Adobe PDF | Öffnen/Anzeigen |
Zur Langanzeige
Räber, M., Heinzelmann, A., & Ould Abdeslam, D. (2020). Analysis of an active charge balancing method based on a single non-isolated DC/DC converter. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/TIE.2020.2972449
Räber, M., Heinzelmann, A. and Ould Abdeslam, D. (2020) ‘Analysis of an active charge balancing method based on a single non-isolated DC/DC converter’, IEEE Transactions on Industrial Electronics [Preprint]. Available at: https://doi.org/10.1109/TIE.2020.2972449.
M. Räber, A. Heinzelmann, and D. Ould Abdeslam, “Analysis of an active charge balancing method based on a single non-isolated DC/DC converter,” IEEE Transactions on Industrial Electronics, 2020, doi: 10.1109/TIE.2020.2972449.
RÄBER, Manuel, Andreas HEINZELMANN und Djaffar OULD ABDESLAM, 2020. Analysis of an active charge balancing method based on a single non-isolated DC/DC converter. IEEE Transactions on Industrial Electronics. 2020. DOI 10.1109/TIE.2020.2972449
Räber, Manuel, Andreas Heinzelmann, and Djaffar Ould Abdeslam. 2020. “Analysis of an Active Charge Balancing Method Based on a Single Non-Isolated DC/DC Converter.” IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/TIE.2020.2972449.
Räber, Manuel, et al. “Analysis of an Active Charge Balancing Method Based on a Single Non-Isolated DC/DC Converter.” IEEE Transactions on Industrial Electronics, 2020, https://doi.org/10.1109/TIE.2020.2972449.
Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.