Publication type: | Conference poster |
Type of review: | Not specified |
Title: | Smart RFID label printed on PET substrate with CMOS sensors |
Authors: | Vásquez-Quintero, A. Frolet, N. Lemaire, E. Koller, M. Furrer, L. Graf, M. Küng, Roland Briand, D. de Rooij, N.F. |
Conference details: | LOPEC, Munich, Germany, 26-28 May 2014 |
Issue Date: | 2014 |
Language: | English |
Subjects: | RFID; Electronics; Printed; Harvesting |
Subject (DDC): | 006: Special computer methods |
Abstract: | The present work shows the fabrication of a printed RFID label using large-area printing processes, such as roto-screen and stencil printing, and the integration with advanced assembly methods of CMOS-based humidity and temperature sensors. The fabrication of the antenna and the PCB on flexible plastic substrates (i.e. polyethylene terephthalate - PET) was performed by means of roto-screen printing in combination with flash photonic sintering. This allows a high thermal transfer to the printed material, which is necessary for its sintering, while preserving the delicate polymeric substrate. Cost-effective and low temperature methods are also developed for the assembling of the components onto polymeric substrates. The electrical interconnections were stencil-printed with isotropic conductive adhesives by using laser-ablated stencil masks on polymer foils. Additionally, the label incorporates an RF remotely rechargeable thin film battery which is used for data logging. Finally, the roto-screen printing of copper oxide patterns and their reduction to copper by means of a Xenon flash photonic process is presented. |
URI: | https://digitalcollection.zhaw.ch/handle/11475/16698 |
Fulltext version: | Published version |
License (according to publishing contract): | Licence according to publishing contract |
Departement: | School of Engineering |
Organisational Unit: | Institute of Signal Processing and Wireless Communications (ISC) |
Appears in collections: | Publikationen School of Engineering |
Files in This Item:
There are no files associated with this item.
Show full item record
Vásquez-Quintero, A., Frolet, N., Lemaire, E., Koller, M., Furrer, L., Graf, M., Küng, R., Briand, D., & de Rooij, N. F. (2014). Smart RFID label printed on PET substrate with CMOS sensors. LOPEC, Munich, Germany, 26-28 May 2014.
Vásquez-Quintero, A. et al. (2014) ‘Smart RFID label printed on PET substrate with CMOS sensors’, in LOPEC, Munich, Germany, 26-28 May 2014.
A. Vásquez-Quintero et al., “Smart RFID label printed on PET substrate with CMOS sensors,” in LOPEC, Munich, Germany, 26-28 May 2014, 2014.
VÁSQUEZ-QUINTERO, A., N. FROLET, E. LEMAIRE, M. KOLLER, L. FURRER, M. GRAF, Roland KÜNG, D. BRIAND und N.F. DE ROOIJ, 2014. Smart RFID label printed on PET substrate with CMOS sensors. In: LOPEC, Munich, Germany, 26-28 May 2014. Conference poster. 2014
Vásquez-Quintero, A., N. Frolet, E. Lemaire, M. Koller, L. Furrer, M. Graf, Roland Küng, D. Briand, and N.F. de Rooij. 2014. “Smart RFID Label Printed on PET Substrate with CMOS Sensors.” Conference poster. In LOPEC, Munich, Germany, 26-28 May 2014.
Vásquez-Quintero, A., et al. “Smart RFID Label Printed on PET Substrate with CMOS Sensors.” LOPEC, Munich, Germany, 26-28 May 2014, 2014.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.